enp4s0d1 → KleyReX
[ 8.945083] mlx4_core 0000:04:00.0: DMFS high rate steer mode is: disabled performance optimized steering [ 8.947071] mlx4_core 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:05.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 9.134358] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0 [ 9.134591] mlx4_en 0000:04:00.0: Activating port:1 [ 9.139640] mlx4_en: 0000:04:00.0: Port 1: Using 16 TX rings [ 9.139641] mlx4_en: 0000:04:00.0: Port 1: Using 16 RX rings [ 9.140086] mlx4_en: 0000:04:00.0: Port 1: Initializing port [ 9.140784] mlx4_en 0000:04:00.0: registered PHC clock [ 9.141164] mlx4_en 0000:04:00.0: Activating port:2 [ 9.142368] mlx4_en: 0000:04:00.0: Port 2: Using 16 TX rings [ 9.142369] mlx4_en: 0000:04:00.0: Port 2: Using 16 RX rings [ 9.142756] mlx4_core 0000:04:00.0 enp4s0: renamed from eth0 [ 9.144904] mlx4_en: 0000:04:00.0: Port 2: Initializing port [ 9.191400] mlx4_core 0000:04:00.0 enp4s0d1: renamed from eth0 [ 9.805385] mlx4_en: enp4s0d1: Link Up [ 10.229700] mlx4_en: enp4s0: Link Up