====== Network ======
enp4s0d1 -> KleyReX

<code>
[    8.945083] mlx4_core 0000:04:00.0: DMFS high rate steer mode is: disabled performance optimized steering
[    8.947071] mlx4_core 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:05.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    9.134358] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[    9.134591] mlx4_en 0000:04:00.0: Activating port:1
[    9.139640] mlx4_en: 0000:04:00.0: Port 1: Using 16 TX rings
[    9.139641] mlx4_en: 0000:04:00.0: Port 1: Using 16 RX rings
[    9.140086] mlx4_en: 0000:04:00.0: Port 1: Initializing port
[    9.140784] mlx4_en 0000:04:00.0: registered PHC clock
[    9.141164] mlx4_en 0000:04:00.0: Activating port:2
[    9.142368] mlx4_en: 0000:04:00.0: Port 2: Using 16 TX rings
[    9.142369] mlx4_en: 0000:04:00.0: Port 2: Using 16 RX rings
[    9.142756] mlx4_core 0000:04:00.0 enp4s0: renamed from eth0
[    9.144904] mlx4_en: 0000:04:00.0: Port 2: Initializing port
[    9.191400] mlx4_core 0000:04:00.0 enp4s0d1: renamed from eth0
[    9.805385] mlx4_en: enp4s0d1: Link Up
[   10.229700] mlx4_en: enp4s0: Link Up
</code>